2012 Doepker 50 Ton 3-Pos Tan-Neck Fixed Roll

  • 2012 Doepker 50 Ton 3-Pos Tan-Neck Fixed Roll  | L06M | Camex Equipment Canada
  • 2012 Doepker 50 Ton 3-Pos Tan-Neck Fixed Roll  | L06M | Camex Equipment Canada
  • 2012 Doepker 50 Ton 3-Pos Tan-Neck Fixed Roll  | L06M | Camex Equipment Canada
  • 2012 Doepker 50 Ton 3-Pos Tan-Neck Fixed Roll  | L06M | Camex Equipment Canada
  • 2012 Doepker 50 Ton 3-Pos Tan-Neck Fixed Roll  | L06M | Camex Equipment Canada
  • 2012 Doepker 50 Ton 3-Pos Tan-Neck Fixed Roll  | L06M | Camex Equipment Canada
  • 2012 Doepker 50 Ton 3-Pos Tan-Neck Fixed Roll  | L06M | Camex Equipment Canada
  • 2012 Doepker 50 Ton 3-Pos Tan-Neck Fixed Roll  | L06M | Camex Equipment Canada
  • 2012 Doepker 50 Ton 3-Pos Tan-Neck Fixed Roll  | L06M | Camex Equipment Canada
  • 2012 Doepker 50 Ton 3-Pos Tan-Neck Fixed Roll  | L06M | Camex Equipment Canada
  • 2012 Doepker 50 Ton 3-Pos Tan-Neck Fixed Roll  | L06M | Camex Equipment Canada
  • 2012 Doepker 50 Ton 3-Pos Tan-Neck Fixed Roll  | L06M | Camex Equipment Canada
  • 2012 Doepker 50 Ton 3-Pos Tan-Neck Fixed Roll  | L06M | Camex Equipment Canada
  • 2012 Doepker 50 Ton 3-Pos Tan-Neck Fixed Roll  | L06M | Camex Equipment Canada
  • 2012 Doepker 50 Ton 3-Pos Tan-Neck Fixed Roll  | L06M | Camex Equipment Canada
  • 2012 Doepker 50 Ton 3-Pos Tan-Neck Fixed Roll  | L06M | Camex Equipment Canada
  • 2012 Doepker 50 Ton 3-Pos Tan-Neck Fixed Roll  | L06M | Camex Equipment Canada
  • 2012 Doepker 50 Ton 3-Pos Tan-Neck Fixed Roll  | L06M | Camex Equipment Canada
  • 2012 Doepker 50 Ton 3-Pos Tan-Neck Fixed Roll  | L06M | Camex Equipment Canada

Details

Equipment ID: 9142
Status: Inventory
Serial #: 2DESNSZ36C1028279
Mileage: 16129*
Hours:548*
Engine: N/A
Transmission: N/A
Suspension:Hendrickson HT Air-Ride (30,000lb)
Front Axle: 25,000lb
Rear Axle: 25,000lb
Availability Available
Certified Until: 2016-03-31 00:00:00
Axle Ratio: 83.5" axle track
Wheelbase: 60" axle spread "
Rr Tire Size/Wear(%): 275/70R22.5 / 100%
Fr Tire Size/Wear(%): 275/70R22.5 / 100%
Working Deck: (W) - 9 (L) - 52
Under Carriage (%): 0
Pad Width: 0
Description:
50 TON TRI-AXLE SCISSORNECK LOWBOY.....100,000lb specified load rating, 3/4" x 6" high tensile steel flanges, 8" x 13" steel cross members on 20" centers, 3" rough Fir decking, 1/2" coupler plate c/w removeable king pin st back 15", Three position folding neck (lowbed & highboy) c/w 3" scissor pins, Heavy duty fold up dolly legs, Full width 8 5/8" live tail roll c/w 2 sets of support rollers, 19 pin pockets & 16 chain pockets per side, 10 stud cast unimount style hubs c/w long studs, 22.5" hub pilotted unimount steel wheels, Rebound chains on all axles, Heavy duty protective mud flap ahead of front axle, Axles are turned so that brake pots are up and ahead, ABS braking system, CMVSS air system c/w suspension dump valve & pressure gauge in sealed control box, Hostler valve at front on emergency line, CMVSS electrical system c/w LED lighting, Side marker & signal lights, Pure Zinc coating applied to fully sand blasted trailer chassis followed up with a Zinc rich PPG High Build Epoxy primer & a PPG Acrycote topcoat.
Options:
Three position scisssor assembly (53" & 72" coupler height) Four (4) of swing out wide load lights c/w flag pockets +PLUS+ Dual rear Strobe lights c/w switch in air control box 7" full width ratcheting center lift roll +PLUS+ one pair of kicker rolls just ahead of suspension Upgrade to a 10 3/4" full width tail roll Upgrade to a T/A booster attachment c/w air & electrical connections Upgrade to load-bearing covered wheel wells Upgrade tires to Michelin XTY2 cut & chip resistant On/Off road tires. Upgrade outboard wheels to POLISHED ALUMINUM